Change sensor identities

Rather than route everything back to one board, take advantage of
some spare space on the breadboard used for door sensors and gang
some 1W sensors there.  This reduces the need for long cables. :)

diff --git a/bin/pidmonitor.py b/bin/pidmonitor.py
index bf345dec58b3f2be7c61821dde481219beab95aa..6d615ed9de7a97e132ce7bbce1492c5ce2f87471 100755 (executable)
--- a/bin/pidmonitor.py
+++ b/bin/pidmonitor.py
@@ -105,15 +105,15 @@ def check_temps(sc):
                  "tank-far", "/home/pi/sc/data/tank-far-temp.rrd")
 
     with_ow_temp(cache,
-                 "/sys/bus/w1/devices/28-03164712aaff/w1_slave", log, logfail,
+                 "/sys/bus/w1/devices/28-041652ea8bff/w1_slave", log, logfail,
                  "heater-near", "/home/pi/sc/data/heater-temp.rrd")
 
     with_ow_temp(cache,
-                 "/sys/bus/w1/devices/28-011620c805ee/w1_slave", log, logfail,
+                 "/sys/bus/w1/devices/28-0416526de6ff/w1_slave", log, logfail,
                  "tank-near", "/home/pi/sc/data/tank-near-temp.rrd")
 
     with_ow_temp(cache,
-                 "/sys/bus/w1/devices/28-0416526de6ff/w1_slave", log, logfail,
+                 "/sys/bus/w1/devices/28-0316479295ff/w1_slave", log, logfail,
                 "tank-top", "/home/pi/sc/data/tank-top-temp.rrd")
 
     # DMX conttrol string; initialize to all channels full off
@@ -133,7 +133,7 @@ def check_temps(sc):
     s = with_ow_temp(cache, "/sys/bus/w1/devices/28-011620f10dee/w1_slave",
             checkpid, with_ow_temp_fk_id3, loop_hidenear, s, 5, "/home/pi/sc/data/hide-near-dmx.rrd", "dmx-hidenear")
 
-    s = with_ow_temp(cache, "/sys/bus/w1/devices/28-011620c805ee/w1_slave",
+    s = with_ow_temp(cache, "/sys/bus/w1/devices/28-0416526de6ff/w1_slave",
             checkpid, with_ow_temp_fk_id3, loop_tanknear, s, 6, "/home/pi/sc/data/tank-near-dmx.rrd", "dmx-tanknear")
 
     print ("check temps fini: out=%r lhn=(%s)" % (s, loop_hidenear))